Kohler Engines

Command PRO



This peak performer features a vertical shaft and air cooling in a V-twin configuration. It's a 4-cycle, gasoline-powered engine with cast iron cylinder liners, aluminum block construction, and an overhead valve design.

Fuel Type
23.5 Vertical V-Twin Air Gasoline Current
Engine Uses


Top-mounted, quick change oil filter is easy to reach and since most of the oil is drained before removal, there's no mess to clean up. Removable cylinder covers require only one tool and provide access to the entire cylinder for thorough cleaning.

High Power Performance.

Overhead valve technology provides greater volumetric efficiency and a higher compression ratio. This produces more power, improved fuel economy and cooling and reduces oil consumption. In addition, there is virtually no carbon buildup, reducing overall maintenance costs. The variable speed, mechanical governor promises smooth performance, regardless of application or fluctuating demands for power.

Durable, Long Life Design.

Hydraulic valve lifters are oil pressurized, ensuring that push rods stay in constant contact with the rocker arms. Requiring no adjustment, the valve train is virtually maintenance-free. In addition, full-pressure lubrication delivers continuous lube to critical engine components, and integrated oil cooler is mounted under the cylinder cover for a compact engine profile and superior cooling. Large capacity, in-line fuel filter provides extra protection against dirt particles that can clog fuel lines.


User-Friendly Maintenance.

  • Top mounted quick change oil filter
  • Extended maintenance intervals
  • Yellow oil fill cap & dipstick handle
  • Large dual oil drains for faster oil changes
  • Easy access oil fill/dipstick
  • Two year limited warranty

High Power Performance.

  • High-performance spark plugs
  • 20 amp charging, regulator
  • Larger in-line fuel filter
  • Overhead valve (OHV) design

Reliability and Long Life Design.

  • Heavy-duty air cleaner
  • Integrated oil cooler
  • Heavy-duty bearings
  • Hardened crank shaft journals
  • High-efficiency fan and screen
  • Cast iron cylinder liners
  • Full pressure lubrication
  • Spin on, full-flow oil filter

Quiet, Smooth Operation.

  • Nylon Cam Gear
  • Hydraulic valve lifters
  • Modulated cooling fan
  • Engineered material blower housing
  • CARB & EPA emission-certified

Easy Dependable Starts.

  • Two-barrel carburetor
  • Electronic ignition system
  • Solenoid shift starter
Engine Uses
Golf Course Maintenance
Lawn & Landscape
Power Generation/Welder
Recreational Vehicles
Utility Equipment

Equipment Types

This engine powers the following equipment:


  • Auger, Grain
  • Feeder
  • Utility Vehicle 2
  • Bale Chopper
  • Two-Wheel Tractor
  • Conveyor
  • Tractor-Utility

Golf Course Maintenance

  • Aerator-Fairway
  • Golf Cart
  • Mower, Greens-Walk-Behind
  • Sod Cutter 2
  • Aerator-Greens
  • Blower-Lawn
  • Mower, Riding Fairway
  • Utility Vehicle
  • Blower - Other
  • Mower, Greens-Riding
  • Sand Trap/Bunker Rake


  • Aerial Lift
  • Buffer/Floor Stripper
  • Compressor
  • Concrete Trowel
  • Fire Pump
  • Loader/Backhoe
  • Mixer
  • Pressure Washer 2
  • Pump - Other
  • Screed
  • Sprayer, Other
  • Tar Kettle/Crack Sealer
  • Utility Vehicle 3
  • Auger/Post Hole Digger
  • Cable Layer
  • Concrete Breaker
  • Curber
  • Forklift
  • Material Handling Power Buggy
  • Paving Equipment
  • Pump, Mud
  • Rammer
  • Signal Board
  • Sprayer, Paint
  • Trencher
  • Vehicle
  • Boaring Equipment
  • Carpet Cleaner
  • Concrete Saw
  • Fan, Cooling/Other
  • Hydraulic Power Pack
  • Mini Excavator/Dozer
  • Planer/Grinder/Scarifier (Concrete)
  • Pump, Oil/Gas
  • Roller
  • Skid Steer Loader
  • Tamper/Plate Compactor
  • Truck Loader/Hoist
  • Vibrator

Lawn & Landscape

  • Aerator
  • Edger
  • Lawn Tractor
  • Mower, Brush Cutter
  • Mower, Trans Steer Front Mount
  • Mower, Walk-Behind
  • Mower, Zero Turning Radius
  • Saw Mill
  • Sprayer, Hydro Mulcher
  • Tiller
  • Chipper/Shredder
  • Fogger
  • Vacuum-Lawn
  • Mower, Rear Steer Front Mount
  • Mower, Trim
  • Mower, Wide Area Walk Behind
  • Pressure Washer
  • Shredder
  • Stump Grinder/Cutter
  • Vacuum
  • Dethatcher
  • Garden Tractor
  • Logsplitter
  • Mower, 3 Wheel Frt Mount, Rear Op
  • Mower, Triplex Trim/Finish Cut
  • Mower, Zero Turning Radius Light Duty
  • Rear Engine Rider
  • Sod Cutter
  • Sweeper
  • Yard Tractor

Power Generation/Welder

  • Light Tower
  • Generator-Portable
  • Welder
  • Generator - Marine
  • Generator-Residential Standby
  • Generator-Mobile
  • Generator-RV

Recreational Vehicles

  • ATV
  • Utility Vehicle 4
  • Go-Kart
  • Golf Cart 2

Utility Equipment

  • Welder

Engine Type:

4-cycle, gasoline, OHV, cast iron cylinder liners, aluminum block

Command PRO® CV732
J1940 Power hp(kW) 1 23.5 (17.5)
Displacement cu in (cc) 45.6 (747)
Bore in (mm) 3.3 (83)
Stroke in (mm) 2.7 (69)
Peak Torque lbs. ft (Nm) 40.3 (54.6)
Compression Ratio 9.1:1
Dry Weight lbs (kg) 105 (48)
Oil Capacity U.S. quarts (L) 2 (1.9)
Lubrication Full pressure w/full-flow filter
Dimensions L x W x H in 20.5 x 16.2 x 19.9
Backpressure Limit 2 50
J1995 Power hp (kW) 3 23.6 (17.6)
J1995 Rated Speed (RPM)  3600
* Length is grass screen to PTO mounting face. Width is spark plug to spark plug. Height is top of air cleaner to mounting feet.
1 Power (hp) and Torque (lbs ft) specifications for Kohler general purpose engines are rated pursuant to Society of Automotive Engineers (SAE) J1940 based on gross output testing performed according to SAE J1995 without the air cleaner and muffler. Actual engine power and torque are lower and affected by accessories (air cleaner, exhaust, charging, cooling, fuel pump, etc.), application, engine speed, ambient operating conditions (temperature, humidity and altitude) and other factors. This J1940 / J1995 rating provides consistent measurement to customers who may want to control the intake and exhaust features of the engine. For more information, contact Kohler Co. Engine Engineering Department. Kohler Co. reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligation.

2 Inches of H20 @ 3600 RPM WOT

3 J1995 power and torque certified by 3rd Party Witness