Kohler Engines. Relentless Power. Legendary Performance.

XT Series

XT775

XT775

The KOHLER XT Series engines features professional-grade features like Overhead Valve (OHV) design for fuel efficiency and cast iron cylinder liners for durability. User-friendly features like Accu-Fill and Easy-Pull technology make it easy for the homeowner to operate. It is EPA emissions-compliant and is backed by a two-year warranty.

Gross Torque
Shaft
Cylinders
Cooling
Fuel Type
Status
7.75 Vertical Single Air Gasoline New
Engine Uses
Specs
Overview
Features
Engine Uses
Utility Equipment
Walk Mower

Equipment Types

This engine powers the following equipment:

  • Aerator
  • Chipper/Shredder
  • Dethatcher
  • Edger
  • Logsplitter
  • Pressure Washer
  • Pump - Other
  • Stump Grinder/Cutter
  • Tiller
  • Aerator
  • Compressor
  • Edger
  • Ice Drill
  • Portable Generator
  • Pressure Washer
  • Shredder
  • Tamper/Plate Compactor
  • Tiller
  • Mower, Walk-Behind
Specs

Engine Type:

Four-cycle, single-cylinder, air-cooled, vertical shaft, gasoline, OHV, with cast iron liner.

Model
XT775
J1940 Torque lbs. ft (Nm) 1 7.75 ()
Displacement cu in (cc) 10.6 (173)
Bore in (mm) 2.7 (70)
Stroke in (mm) 1.8 (45)
Compression Ratio 8.5:1
Dry Weight lbs (kg) 26.9 (12.2)
Oil Capacity U.S. quarts (L) 0.6 (0.6)
Lubrication Splash
Dimensions L x W x H in 17.1 x 13.9 x 11
Backpressure Limit 2 40
J1995 Torque lbs ft (Nm) 3 7.46 (10.11)
J1995 Rated Speed (RPM)  2800
* Length is front of blower housing to back of blower housing. Width is air cleaner to muffler. Height is mounting surface to grass screen.
1 Power (hp) and Torque (lbs ft) specifications for Kohler general purpose engines are rated pursuant to Society of Automotive Engineers (SAE) J1940 based on gross output testing performed according to SAE J1995 without the air cleaner and muffler. Actual engine power and torque are lower and affected by accessories (air cleaner, exhaust, charging, cooling, fuel pump, etc.), application, engine speed, ambient operating conditions (temperature, humidity and altitude) and other factors. This J1940 / J1995 rating provides consistent measurement to customers who may want to control the intake and exhaust features of the engine. For more information, contact Kohler Co. Engine Engineering Department. Kohler Co. reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligation.

2 Inches of H20 @ 3600 RPM WOT

3 J1995 power and torque certified by 3rd Party Witness